Deburring is the process of removing sharp edges, or burrs, from a material, and leaves the material with smooth edges. Deburring is commonly performed after machining operations, such as milling, turning, and drilling, which typically leave sharp edges on the material. Deburring can be performed...
What is your primary criterion that affects your choice in a machinery investment? High quality Reasonable price Compliance with international standards After-sales service and consultancy Machine customization High performance Long-lasting Delivery on time A reliable and expert supplier that gives importance to customer satisfactionAs KAYAKOCVIB® SURFACE FINISHING MACHINES, we have had all the...
How to Treat Wastewater Come From Vibratory Bowls or Centrifugal Disc Finishing Machines? We have solved the wastewater treatment issues in three ways. How to Treat Wastewater Come From Vibratory Bowls or Centrifugal Disc Finishing Machines? Every solution has a different price but the most important...
If you have decided to invest in a machine in your business, you should first review your daily production volume. Daily production amount is the biggest factor in machine selection. The daily production amount allows us to determine the capacity of the machine. For example;...
CERAMIC CHIPS Ceramic abrasive chips are used in vibratory machines and drums for deburring-grinding and to remove surface roughness of sharp corners in iron and some non-ferrous metals. Our ceramic stone formulation can be prepared in various compositions depending on the desired surface quality. Our chips...
The selection of the most suitable abrasive stone for the product is made according to two different criteria. 1- The raw material of the product or the type of metal used: Stones with different abrasiveness are produced for metals with different hardness. For example, plastic abrasive stones...
A good surface is obtained in the following five steps, respectively. Degreasing (pre-washing process) Deburring Polishing Rinse Drying What is a burr? Burrs are residual parts of height or protruding edge or material that remain on its surface, edges, or product-specific parts after production, which are produced by machines such as presses...
